Grain Bin Solutions » BinMaster
Established in 1953, BinMaster is an ISO 9001:2008 certified company that designs and manufactures reliable, solid-state point and continuous bin level indicator and control systems and sensoring devices used while storing or processing powder and bulk solids such as cement and aggregates, chemicals, feed and grain, food, plastics, biofuels, pharmaceuticals, pulp and paper, and wood products.
BinMaster Categories
BinMaster Shielded Bare Stainless Steel Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Shielded Bare Stainless Steel Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Shielded Delrin Sleeved 3-A/USDA Probes work with PROCAP I 3-A and II 3-A Power Pacs. Fitting options include 1" or 2" sanitary 316 stainless steel fitting for use with tri-clamp.
BinMaster Shielded Delrin Sleeved 3-A/USDA Probes work with PROCAP I 3-A and II 3-A Power Pacs. Fitting options include 1" or 2" sanitary 316 stainless steel fitting for use with tri-clamp.
BinMaster Shielded Delrin Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Shielded Delrin Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Shielded Teflon Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Shielded Teflon Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
The SHT Series is built specifically for higher process temperatures up to 482°F (250°C). Features of the SHT Series include a standard insulation tube that insulates the electronics from...More Details »
The SHT Series is built specifically for higher process temperatures up to 482°F (250°C). Features of the SHT Series include a standard insulation tube that insulates the electronics from...More Details »
The SHT Series is built specifically for higher process temperatures up to 482°F (250°C). Features of the SHT Series include a standard insulation tube that insulates the electronics from...More Details »
The SHT Series is built specifically for higher process temperatures up to 482°F (250°C). Features of the SHT Series include a standard insulation tube that insulates the electronics from...More Details »
The BRMX rotary paddle bin level indicator provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers, and conveyors for materials including grain,...More Details »
The BRMX rotary paddle bin level indicator provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers, and conveyors for materials including grain,...More Details »
Rotary shaft extensions are available in a wide variety of standard lengths in stainless steel or galvanized finish.
Rotary shaft extensions are available in a wide variety of standard lengths in stainless steel or galvanized finish.
Rotary shaft guards are available in a wide variety of standard lengths in stainless steel or galvanized finish.
Rotary shaft guards are available in a wide variety of standard lengths in stainless steel or galvanized finish.
The BinMaster Tilt Switch is a cost-effective level indicator that is used to detect high levels of large, heavy materials in bins, tanks, and silos. Alternatively, it can be used to detect plugs...More Details »
The BinMaster Tilt Switch is a cost-effective level indicator that is used to detect high levels of large, heavy materials in bins, tanks, and silos. Alternatively, it can be used to detect plugs...More Details »
BinMaster Unshielded Bare Stainless Steel Probes work with PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Unshielded Bare Stainless Steel Probes work with PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Unshielded Bendable Teflon Coated & Bare Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food...More Details »
BinMaster Unshielded Bendable Teflon Coated & Bare Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food...More Details »
BinMaster Unshielded Delrin Sleeved 3-A/USDA Probes work with PROCAP I 3-A and II 3-A Power Pacs. Fitting options include 1" or 2" sanitary 316 stainless steel fitting for use with tri-clamp.
BinMaster Unshielded Delrin Sleeved 3-A/USDA Probes work with PROCAP I 3-A and II 3-A Power Pacs. Fitting options include 1" or 2" sanitary 316 stainless steel fitting for use with tri-clamp.
BinMaster Unshielded Delrin Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Unshielded Delrin Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Unshielded Teflon Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
BinMaster Unshielded Teflon Sleeved Probes work with PROCAP IX, IIX, PRO Remote, PROCAP I, II, and PRO Auto-Cal Power Pacs. Fitting options include 3/4" NPT, 1 1/4" NPT, 1" food grade, and 1"/2"/3"/4" 150# raised face flanges.
Choose from BinMaster's selection of mounting plates to install your vibrating rod sensor!
Choose from BinMaster's selection of mounting plates to install your vibrating rod sensor!
The VR-21 is BinMaster’s standard piezoelectric driven vibration type point level switch, which has an insertion length of 7.37 inches. Its unique single-rod probe design with a sword-shaped...More Details »
The VR-21 is BinMaster’s standard piezoelectric driven vibration type point level switch, which has an insertion length of 7.37 inches. Its unique single-rod probe design with a sword-shaped...More Details »
The VR-31 vibrating rod for sanitary applications is designed for high, mid, and low level detection in bins, silos, tanks, hoppers, chutes, and other vessels used for material storage and process...More Details »
The VR-31 vibrating rod for sanitary applications is designed for high, mid, and low level detection in bins, silos, tanks, hoppers, chutes, and other vessels used for material storage and process...More Details »
The VR-41 is designed for use with a variety of heavy, medium, and light materials, including extremely light, fluffy materials. Intended for top mount locations, it is available in lengths from...More Details »
The VR-41 is designed for use with a variety of heavy, medium, and light materials, including extremely light, fluffy materials. Intended for top mount locations, it is available in lengths from 13...More Details »
The VR-51 extended vibrating rod uses a steel-rope reinforced cable and allows for insertion lengths from 19 inches up to 19 feet. This vibrating rod with a flexible extension is custom...More Details »
The VR-51 extended vibrating rod uses a steel-rope reinforced cable and allows for insertion lengths from 19 inches up to 19 feet. This vibrating rod with a flexible extension is custom...More Details »
BinMaster Products
Description: Four-light panel, 115 VAC, complete with LED lights and buzzer.
*Model BM-12 shown in photo.
Condition:
New
Please Call for Availability
Description: Eight-light panel, 115 VAC, complete with LED lights and buzzer.
*Model BM-12 shown in photo.
Condition:
New
Please Call for Availability
Description: Tilt switch for high level limit switch applications.
Condition:
New
Please Call for Availability
Description: BMRX 115 VAC rotary level indicators feature a triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish,...More Details »
Condition:
New
Please Call for Availability
Description: BMRX rotary level indicator 12 to 24 VDC with dual conduit entries, DPDT relay contacts, selectable fail-safe protection, and FDA recognized powder coat finish. Approvals pending.
Condition:
New
Please Call for Availability
Description: BMRX 12 VDC rotary level indicators feature a triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous...More Details »
Condition:
New
Please Call for Availability
Description: BMRX 230 VAC rotary level indicators feature a triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish,...More Details »
Condition:
New
Please Call for Availability
Description: BMRX 24 VAC rotary level indicators feature a triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous...More Details »
Condition:
New
Please Call for Availability
Description: BMRX 24 VDC rotary level indicators feature a triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous...More Details »
Condition:
New
Please Call for Availability
Description: SmartBob control console for 1 to 128 bins, wall mount console with LCD display, NEMA 4X, 16 VAC or 24 VDC. Measurement formats can be displayed as headroom percentage, headroom height, headroom...More Details »
Condition:
New
Please Call for Availability
Description: SmartBob Modbus control console allows Modbus serial masters to gather data from SmartBob2 or SmartBob-TS1 sensors. Modbus protocol is defined as a master/slave protocol, meaning a device...More Details »
Condition:
New
Please Call for Availability
Description: Communication Adapter, TCP/IP to serial.
*Photo shown as connection with adapter.
Condition:
New
Please Call for Availability
Description: 115 VAC Compact capacitance probe with buildup protection features LED on housing to indicate sensor status, one-time calibration procedure, 1 to 30 second time delay, 5 amp, SPDT fail-safe relay...More Details »
Condition:
New
Please Call for Availability
Description: 230 VAC Compact capacitance probe with buildup protection features LED on housing to indicate sensor status, one-time calibration procedure, 1 to 30 second time delay, 5 amp, SPDT fail-safe relay...More Details »
Condition:
New
Please Call for Availability
Description: 24 VDC Compact capacitance probe with buildup protection features LED on housing to indicate sensor status, one-time calibration procedure, 1 to 30 second time delay, 5 amp, SPDT fail-safe relay...More Details »
Condition:
New
Please Call for Availability
Description: The pipe extension is an optional feature that is screwed to the 3" NPT SmartBob2 mount. The pipe extension keeps the sensor probe from being pulled up into the standpipe, functions as a bushing,...More Details »
Condition:
New
Please Call for Availability
Description: With Teflon insert for high temperatures. An unshielded probe whose length can be modified in the field. The probe will work reliably in a variety of powders and dry bulk solid materials. It can...More Details »
Condition:
New
Please Call for Availability
Description: Designed with a 10" extended PRO-Shield, used when mounting the probe through a nozzle of standpipe. It works in bulk solids, slurries, and liquids. It has a rugged 5/8" diameter stainless steel...More Details »
Condition:
New
Please Call for Availability
Description: Designed with a 10" extended PRO-Shield, used when mounting the probe through a nozzle of standpipe. It works in bulk solids, slurries, and liquids. It has a rugged 5/8" diameter stainless steel...More Details »
Condition:
New
Please Call for Availability
Description: The bare stainless steel probe is BinMaster's most versatile all-purpose probe whose length can be modified in the field. It works reliably in bulk solids, slurries, and liquids. It has a rugged...More Details »
Condition:
New
Please Call for Availability
Description: Sanitary probe meets 3-A and USDA standards, conforming to the food industry's most demanding requirements for material, surfaces, and clean-in-place construction. This probe is designed for quick...More Details »
Condition:
New
Please Call for Availability
Description: The Delrin sleeved probe is a versatile all-purpose fully insulated probe. It works in bulk solids, slurries, and liquids. It has a rugged 5/8" diameter stainless steel probe featuring...More Details »
Condition:
New
Please Call for Availability
Description: The Teflon sleeved probe is a versatile all-purpose fully insulated probe. It works in bulk solids, slurries, and liquids. It has a rugged 5/8" diameter stainless steel probe featuring "PRO-Shield"...More Details »
Condition:
New
Please Call for Availability
Description: Includes 3/4" NPT fitting. This probe can be bent to avoid obstructions in a vessel while still allowing adequate probe surface area to detect presence or absence of material. The bendable probe...More Details »
Condition:
New
Please Call for Availability
Description: An unshielded probe whose length can be modified in the field. It can be cut back to 3 inches or extended to 8 feet. The probe will work reliably in a variety of powders and dry bulk solid...More Details »
Condition:
New
Please Call for Availability
Description: Sanitary probe meets 3-A and USDA standards, conforming to the food industry's most demanding requirements for material, surfaces, and clean-in-place construction. The unshielded fully insulated...More Details »
Condition:
New
Please Call for Availability
Description: The unshielded fully insulated Delrin sleeved probe was designed to be a lower cost, yet versatile probe. This all-purpose probe works reliably in bulk solids, powders, slurries, and liquids. It...More Details »
Condition:
New
Please Call for Availability
Description: Includes 3/4" NPT fitting. This probe can be bent to avoid obstructions in a vessel while still allowing adequate probe surface area to detect presence or absence of material. The bendable probe...More Details »
Condition:
New
Please Call for Availability
Description: The unshielded fully insulated Teflon sleeved probe was designed to be a lower cost, yet versatile probe. This all-purpose probe works reliably in bulk solids, powders, slurries, and liquids. It...More Details »
Condition:
New
Please Call for Availability
Description: Compact vibrating rod level sensor with 6" insertion length, 20 to 250V AC/DC.
Remote electronics available upon request.
Condition:
New
Please Call for Availability
Description: Compact vibrating rod level sensor with 6" insertion length, 20 to 250V AC/DC, high temp probe assembly for temperatures up to 300°F with 2" temperature insulating lag tube.
Remote electronics available upon request.
Condition:
New
Please Call for Availability
Description: Compact vibrating rod level sensor, 1 1/4" NPT, 20 to 250 V AC/DC
Condition:
New
Please Call for Availability
Description: Compact vibrating rod level sensor, 1 1/4" NPT, high temp probe assembly.
Condition:
New
Please Call for Availability
Description: 24 VDC / 30 VA, NEMA 1 din rail mounted power supply to power C-50 analog expansion box for SmartBob, or powers up to 7 scanners or 3 scanners and one LinkPro for 3DLevelScanner.
*Photo shown with connection using 24 VDC on a 3DLevel Scanner.
Condition:
New
Please Call for Availability
Description: Plastic sensing digestible bottle empty, to be filled with 32 ounces of material in the field.
Condition:
New
Please Call for Availability
Description: Explosion proof, CSA approved Class I, II, and III, Div I and II, all groups. Intrinsically safe.
Condition:
New
Please Call for Availability
Description: Explosion proof, hazardous location CSA approved Class I, II & III, Div I & II, all groups. Intrinsically safe. Requires approved control unit and must have sanitary fitting or flange mount. For one-piece configuration on transmitters.
Condition:
New
Please Call for Availability
Description: Explosion proof, hazardous location CSA approved Class II, Div II, Groups F & G. Intrinsically safe. Requires approved control unit and must have sanitary fitting or flange mount. For two-piece configuration on transmitters.
Condition:
New
Please Call for Availability
Description: Plastic sensing digestible bottle filled with 32 ounces of paraffin wax. For use with SBR II only.
Condition:
New
Please Call for Availability
Description: Plastic sensing digestible bottle filled with 16 oz. of paraffin wax.
Condition:
New
Please Call for Availability
Description: Doppler flow / no flow monitor with open remote electronics.
Condition:
New
Please Call for Availability
Description: No probe intrusion, designed for space constrained areas or applications where material flow or bridging may damage standard probes. The probe mounts flush on a vessel wall, conveyor housing, or...More Details »
Condition:
New
Please Call for Availability
Description: Total insertion length of vibrating sensor probe from 13" up to 13'. Specify length upon ordering.
Condition:
New
Please Call for Availability
Description: Gasket for 2" sanitary fitting.
*Photo shown with VR-31, clamp, gasket, and flange.
Condition:
New
Please Call for Availability
Description: Gasket for clamp connection for 3-A probe
Condition:
New
Please Call for Availability
Description: Flexible Stainless Steel Top Mount Coupler
Condition:
New
Please Call for Availability
Description: 0° Mild Carbon Steel Half Coupling
Condition:
New
Please Call for Availability
Description: 1" NPT powder coated carbon steel mounting plate with half coupling
Condition:
New
Please Call for Availability
Description: 30° Mild Carbon Steel Full Coupling, Powder Coated with Black Neoprene Gasket
Condition:
New
Please Call for Availability
Description: 0° Stainless Steel Half Coupling
Condition:
New
Please Call for Availability
Description: 0° Stainless Steel Full Coupling with White Silicone Gasket
Condition:
New
Please Call for Availability
Description: 20° Mild Carbon Steel Full Coupling, Powder Coated with Black Neoprene Gasket
Condition:
New
Please Call for Availability
Description: 10°, 1 1/2" NPT mounting plate for GWR-1000
Condition:
New
Please Call for Availability
Description: 30°, 1 1/2" NPT mounting plate for GWR-1000
Condition:
New
Please Call for Availability
Description: 0° Mild Carbon Steel Full Coupling, Powder Coated with Black Neoprene Gasket
Condition:
New
Please Call for Availability
Description: 0° Stainless Steel Half Coupling
Condition:
New
Please Call for Availability
Description: 0° Stainless Steel Full Coupling with Black Neoprene Gasket
Condition:
New
Please Call for Availability
